Multiphonics CV-1 Manual

Version 1.1.0

Mix 5

Module
  1. Input 1 to 5 Input jacks for signals to be mixed.
  2. Gain Knob 1 to 5 Sets the input gain in the mix.
  3. Modulation 1 to 5 Gain modulation input.
  4. Level Knob ±12dB trim on the output signal.
  5. Mix Output Mix of inputs 1 to 5.

Overview

This is a 5-channel monophonic mixer that can be used for audio or CV signals.

The gain of each channel can be modulated by connecting a CV signal to its modulation input. If you set the gain knob fully counterclockwise and connect an envelope signal into the modulation input, the channel will act like a simple VCA.

The Polarizing Mix 5 module is similar to Mix 5, but it has bipolar attenuators that can invert the signal, which can make it an interesting choice for CV signals.

Preparing your download…
This can take up to a minute.