Tassman FX Pack

• Box Modeler
  The Box Modeler is a speaker cabinet simulator. A bank of filters provides cutoff frequency and resonance controls to shape the response of the virtual speaker. The Tassman's output stage delay and reverb add a sense of space and dimension to the effect.

  Box Modeler (Original) (0.3MB MP3)
  Box Modeler (Processed) (0.3MB MP3)
  The original is the DI output of a Trademark60 guitar amplifier.

• monoFilter
  The monoFilter is an envelope and synced-LFO controlled 4-pole resonant lowpass filter. This simple arrangement yields creative results on drum loops, guitar and bass. The envelope is triggered from the input signal detection circuit or via a MIDI signal.

  monoFilter (0.3MB MP3)

• Octaver
  The Octaver is a synth-like pure-square signal generator. The synthesized signals provided by the Octaver are based on the incoming audio signal - the first signal is at the same pitch and the second is one octave lower. The signals can then be shaped with the two 4-pole resonant lowpass filters. This is a really nasty effect - abuse with care :)

  Octaver (0.3MB MP3)
  The source signal is an electric guitar.

• Panner
  The Panner is a simple pan pot, but controlled with a CV sequencer and synced-LFO. This effect works great on mono material - Give new life to those mono drum loops!

  Panner (Original) (0.3MB MP3)
  Panner (Processed) (0.3MB MP3)

• Phaser
  This is the classic Tassman phaser effect patched for real time use.

  Phaser (Original) (0.4MB MP3)
  Phaser (Processed) (0.4MB MP3)

• Sync Tremolo
  This effect is a tempo-synced variable wave form and stereo width tremolo effect. A new classic!

  Sync Tremolo (0.4MB MP3)

• Tremolo
  This is the classic Tassman tremolo effect patched for real time use.
• Tube Booster II
  The Tube Booster II is a ten band tubular processor and echo generator. It was originally found in earlier versions of Tassman as an offline sound file processor - This new incarnation can be used in real time in your favorite host application. Each tube's length corresponds to a resonant frequency. Truly unique!

  Tube Booster II - Buzz Dub (Original) (0.2MB MP3)
  Tube Booster II - Buzz Dub (Processed) (0.2MB MP3)

  Tube Booster II - Mantra (Original) (0.1MB MP3)
  Tube Booster II - Mantra (Processed) (0.1MB MP3)

• Vintage EQ
  The Vintage EQ is inspired by the Pultec equalizers. Like its predecessors Vintage EQ features discrete frequency selection as well as boost and attenuation controls for each of the five frequency bands. The capability of boosting and attenuating the same frequency creates a really musical effect.